Dear fix ya member, The problem is in the mainboard, you must check the printhead first, before change the mainboard. Why it can be happened? The Print head have a short circuit on the heater voltage, and the supplay voltage came from the main board. It is totaly problem from the mainboard not at the carriage unit, or the power supplay. please contact me if you wat to fix your plotter mainboard. My email is [email protected]
This error comes up when there is an issue with the power supply unit. For additional information, you may also refer to the down loadable link and go to page 264: http://bit.ly/14m9F6U Hope this helps.
Answers & Comments
Dear fix ya member,
The problem is in the mainboard, you must check the printhead first, before change the mainboard. Why it can be happened?
The Print head have a short circuit on the heater voltage, and the supplay voltage came from the main board. It is totaly problem from the mainboard not at the carriage unit, or the power supplay.
please contact me if you wat to fix your plotter mainboard. My email is [email protected]
This error comes up when there is an issue with the power supply unit. For additional information, you may also refer to the down loadable link and go to page 264: http://bit.ly/14m9F6U
Hope this helps.