17
Just moved to a place that has this dishwasher but don't have a manual for it. The previous owners said that the washer worked fine. The water is conected to it and all lights come on when I press the main switch on.
When I open and then close the door and then press the ON switch, at top left of the door, a red light on the right side shows "END". When I press any of the other switches to the right of this (I assume these are the programme settings as they show 3 different items that can be washed at different temperature) - they light up - but when I close the door the machine does not start. The ex owners are no longer in the UK - so can't ask their help. Any idea how to get the machine going?
Dishwashers - Tecnik - 24 in. TKD795/3 Built-in Dishwasher
Answers & Comments
You can try reseting the machine buy holging down outside two cycle buttons for 3 seconds, then release. After a minute the end light should come on. Then use as normal. If this fails pull the unit out, then take of the side panels (screws to the front in the seal) & check the red anti-flood float on the left side of the machine, to make sure it is not up activating the cut out switch. This may be due to the machine leaking somewhere and the float raises and activates the switch, or as in my case a build up of limscale has raised it up enough to activate it.
Hope this helps