Hello. Set it to .030 and your be fine
It would be 0.25 gap to your spark plug
It would be 0.25 gap to your spark plug It would be 0.25 gap to your spark plug
.25 is the setting, but if your saw is hard to start after operating .30 will alleviate this problem. .25 is the setting, but if your saw is hard to start after operating .30 will alleviate this problem.
The plug gap should be 0.5mm
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Hello. Set it to .030 and your be fine
It would be 0.25 gap to your spark plug
It would be 0.25 gap to your spark plug
.25 is the setting, but if your saw is hard to start after operating .30 will alleviate this problem.
The plug gap should be 0.5mm