For you to access the router page you need to make sure that the computer is connected to your router by either wired or wireless connection. Open a browser then type 192.168.1.1 on the address bar. The Default Username is admin and the Password is password. If this does not work you can follow the steps listed below.
1. You need to know the ip address of your router. Click on START then RUN. Type CMD on the small box on the lower left of the screen. Type IPCONFIG on the black window and get the value of your DEFAULT GATEWAY (it starts with 192.168.x.x)
2. Open a Browser, Type the DEFAULT GATEWAY on the address bar of your Browser. he Default Username is admin and the Password is password.
Answers & Comments
Hi smartg17,
For you to access the router page you need to make sure that the computer is connected to your router by either wired or wireless connection. Open a browser then type 192.168.1.1 on the address bar. The Default Username is admin and the Password is password. If this does not work you can follow the steps listed below.
1. You need to know the ip address of your router. Click on START then RUN. Type CMD on the small box on the lower left of the screen. Type IPCONFIG on the black window and get the value of your DEFAULT GATEWAY (it starts with 192.168.x.x)
2. Open a Browser, Type the DEFAULT GATEWAY on the address bar of your Browser. he Default Username is admin and the Password is password.
Thanks for using Fixya.