Try plugging you computer into the router via a network cable. It should pick up an IP address. Open up a cmd window from the run command in the start menu. Type: ipconfig /all (Press enter) You should see your ip address which has been assigned to you. Look for the default gateway address. Enter the gateway address into the browser. HTTP://{gateway IP address} Good luck. Hope this helps
For you to access the router page you need to make sure that the computer is connected to your router by either wired or wireless connection. Open a browser then type 192.168.1.1 on the address bar. The Default Username is admin and the Password is password.
Answers & Comments
Try plugging you computer into the router via a network cable.
It should pick up an IP address.
Open up a cmd window from the run command in the start menu.
Type: ipconfig /all (Press enter)
You should see your ip address which has been assigned to you. Look for the default gateway address.
Enter the gateway address into the browser.
HTTP://{gateway IP address}
Good luck.
Hope this helps
Hi smartg17,
For you to access the router page you need to make sure that the computer is connected to your router by either wired or wireless connection. Open a browser then type 192.168.1.1 on the address bar. The Default Username is admin and the Password is password.
Rate me if this works so i can help others.
Thanks for using Fixya.