20 minutes ago my computer was fine, its a packard bell imedia 3051. i turned it off the usual and proper way and switched it off at the wall. i just switched it all back on and now it wont even turn on i press on the on switch and nothing, any suggestions would be great thanks
I am giving you a step which you should try once and see if it makes any difference.
Method (Power cycle)
You need to unplug the power cord from the tower and also remove any other device connected to the computer (May be any additional cards or any wires as for Ethernet or speakers mouse, keyboard).
Nothing should be connected at all to the tower.
Now Press and hold the power button on the tower for 25 seconds (It wont show anything). This is a step to release any static charges developed, which may surely caused the kind of issue you are facing.
Now connect the Power, keyboard and mouse and check, it should certainly work now.
Answers & Comments
I am giving you a step which you should try once and see if it makes any difference.
Method (Power cycle)
You need to unplug the power cord from the tower and also remove any other device connected to the computer (May be any additional cards or any wires as for Ethernet or speakers mouse, keyboard).
Nothing should be connected at all to the tower.
Now Press and hold the power button on the tower for 25 seconds (It wont show anything). This is a step to release any static charges developed, which may surely caused the kind of issue you are facing.
Now connect the Power, keyboard and mouse and check, it should certainly work now.
Hope this should help
Regards
Sammy