2000 Buell Cyclone M2 signals not working. No power to signals but I have power to everything else. I replaced the flasher with a generic 3 blade but might not be the right one. What is a good replacement flasher and if that doesn't work what else can I try? thanks, Nick
First off M2 is a geat bike. I havent really run into these problems with it, but, if all 4 signals are not working, and there are no codes, and the signals are stock, usually it is almost always a flasher relay that is out. Now if they are not stock, you may need a load equalizer, and of course check for codes to see if there is a bad something internally. You may have to take it in to check for codes.
Answers & Comments
First off M2 is a geat bike. I havent really run into these problems with it, but, if all 4 signals are not working, and there are no codes, and the signals are stock, usually it is almost always a flasher relay that is out. Now if they are not stock, you may need a load equalizer, and of course check for codes to see if there is a bad something internally. You may have to take it in to check for codes.