2001 Audi A6 Quattro, 2.8l 30 valve. How do I set the cams and crank timing without damaging the valves when the timing belt was removed with the engine not on TDC
Remove the spark plugs and measuring the distance through the plug holes with a rod, very gently turn the crankshaft (either way) until you are certain all the pistons are well below tdc and then gently bring the camshaft(s) to the timing position, followed by bringing the crank to the timing position.
Answers & Comments
Remove the spark plugs and measuring the distance through the plug holes with a rod, very gently turn the crankshaft (either way) until you are certain all the pistons are well below tdc and then gently bring the camshaft(s) to the timing position, followed by bringing the crank to the timing position.