Hi, it is pretty straightfoward (ahem, you know how this can go. depends on whether your wiper arm retaining bolt is frozen and snaps off the shaft or not). First, take a look at your fuse to make sure it is intact. If it is, just gently pop off all of the plastic trim covering the tailgate, and undo screws too as necessary. Then test the connector wires to be sure you are still getting power back there to the motor, I used a $4 test light that I got from AutoZone. Then use a large philips head screwdriver and 10mm socket to remove the whole dang thing.
Answers & Comments
Hi, it is pretty straightfoward (ahem, you know how this can go. depends on whether your wiper arm retaining bolt is frozen and snaps off the shaft or not). First, take a look at your fuse to make sure it is intact. If it is, just gently pop off all of the plastic trim covering the tailgate, and undo screws too as necessary. Then test the connector wires to be sure you are still getting power back there to the motor, I used a $4 test light that I got from AutoZone. Then use a large philips head screwdriver and 10mm socket to remove the whole dang thing.