2005 saturn ion 2. Will not start. Engine will crank but will not fire. Have fuel preess at fuel rail. Can hear fuel pump. Ignition module and ignition coil pack changed recently. Spark plugs changed less than 3000 miles ago. Where can I go next?
The first thing to do is scan the computer for codes,also when the module was installed did you clean the mounting area good? the next thing i would look at would be the crank sensor, also theres a reprogram on these cars,the dealer needs to install or update a computer progranm on some of these, you would have to call with the vin #, this doesnt affect your nostart condition, its just something you should have done,
Those saturns had troubles with ignition switch due the terminals on the inside of the switch not making contact you can run voltage tests to determine check for volts with ignitio on and off you will have to remove the plastic off the steering column to access the switch. thank you josh.
Answers & Comments
The first thing to do is scan the computer for codes,also when the module was installed did you clean the mounting area good? the next thing i would look at would be the crank sensor, also theres a reprogram on these cars,the dealer needs to install or update a computer progranm on some of these, you would have to call with the vin #, this doesnt affect your nostart condition, its just something you should have done,
Those saturns had troubles with ignition switch due the terminals on the inside of the switch not making contact you can run voltage tests to determine check for volts with ignitio on and off you will have to remove the plastic off the steering column to access the switch. thank you josh.