Pop off the end caps on the control panel and remove the screws ,,,then pull the panel slightly forward and flip it back ih has plastic hinges on top so be careful,,,, next unplug your lid switch,,,then remove the two clips holding the back to the base with a screwdriver,,, then open the lid reach inside the inner rim and pull the back towards you at about a 45degree angle and then lift the base off the frame ,,,look inside and pay attention how the base comes off the frame and it will be easier to put back together!
Answers & Comments
Pop off the end caps on the control panel and remove the screws ,,,then pull the panel slightly forward and flip it back ih has plastic hinges on top so be careful,,,, next unplug your lid switch,,,then remove the two clips holding the back to the base with a screwdriver,,, then open the lid reach inside the inner rim and pull the back towards you at about a 45degree angle and then lift the base off the frame ,,,look inside and pay attention how the base comes off the frame and it will be easier to put back together!