Okay go with what you original manufacture says reversing wires means hazard do not flow off the chart here do exactly what you been doing, my concern this is your second lamp the lamp holder is called a ballast if this ballast is not working 100 percent this could be your issue, change the ballast. Like i said a ballast is the connector @ lamp. The jumping of the picture would be the color wheel if this is dlp sounds like a dlp as there is a lamp involved here so check the color wheel.
So to wrap this up No do not switch your course to failure keep putting you lamp's the way the old one came out the jumping of picture would not be related to the lamp more a color wheel.
Thanks I hope this information helps you.
please do click the accept button.
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620
Answers & Comments
Okay go with what you original manufacture says reversing wires means hazard do not flow off the chart here do exactly what you been doing, my concern this is your second lamp the lamp holder is called a ballast if this ballast is not working 100 percent this could be your issue, change the ballast. Like i said a ballast is the connector @ lamp. The jumping of the picture would be the color wheel if this is dlp sounds like a dlp as there is a lamp involved here so check the color wheel.
So to wrap this up No do not switch your course to failure keep putting you lamp's the way the old one came out the jumping of picture would not be related to the lamp more a color wheel.
Thanks I hope this information helps you.
please do click the accept button.
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620