4" adapter and a speaker cable, and the cab is producing sound, but the volume is very low and stays the same at every setting
My only idea is that perhaps the adapter from the 1/8" aux output port to the 1/4" speaker cable might be causing the problem. However, I don't know how else to connect the amp to the cab. I talked to an employee at Guitar Center and he told me there's no reason such a setup shouldn't work.
Music - Peavey - ValveKing 412 Guitar Cabinet Straight
Answers & Comments
This is a VERY low level output designed for headphones and will not drive a cab directly, you'll need an amp, take it to line in of an amp and all should be fine (REMEMBER This is designed to drive stereo headphones so is a TRS Right,Left,Screen. If you plug it into a mono input you will probably be shorting out one side of the peavey's output so get a splitter.