401s Rockford Fosgate Amp. Not powering on,just protect lite is on
401s Rockford Fosgate Amp. Not turning on. No power light. Pos+ and GR- are solid. Thought it may be remote, so tried running a wire from the POS+ to REM to test it, no luck After i got my car jumped my amp has the protect lite on not power lite please help
Car Audio & Video - Rockford Fosgate - Punch 401S Car Audio Amplifier
Answers & Comments
The problem is mostly with your audio side of the amp. i have a 800 Rockford punch series amp hooked in series running at about 15 vdc at 2 ohms stable for now. but the amps left front power side transistors overloaded and smoked out, i will be replaceing my mosfets soon. Now on that side your issues apear to be related to the signal side of the amp. when you hooked the amp up tell me breifly did you hook the rca inputs to the back of the sterio and did you select the proper rca inputs for the amp? also note that amps have a potentiomater that can be tuned up or down to allow the volume or wattage to go up or down threw the system. if it's turned all the way down you'll here nothing. but often you'll get a pop sound or quickly see the speaker move a bit. this indicated the signal side of the amp has signal comming in but no output, just look for a turnable small screw inside the amp top or side. and turn up acordingly. note: to much output will damadge your system. not just the amp. ;)
Try hooking the remote wire to a rem wire on the back of stereo. post and let me know results
Ok i just got a 401s rockford fosgate amp for my 2001 dodge and i got it grounded and power hooked up plus the remote wire hooked up but it wont respon
any suggestions?