FYI - The manufacturer specifications note that the bios will only note 3GB even though 4GB are installed.
Due to the South Bridge resource deployment, the system density will only be detected up to 3+ GB (not full 4GB) when each DIMM is installed with an 1GB memory module
Here is the link, follow it all the way to http://www.msicomputer.com/product/p_spec.asp?model=k8n_neo4_platinum
If your OS is reading the 4Gb, it will be running the 4GB even if the bios is only seeing 3GB. You may just need to update the firmware on your motherboard but I suggest that you just leave it as is since the OS is recognizing the 4GB.
Answers & Comments
FYI - The manufacturer specifications note that the bios will only note 3GB even though 4GB are installed.
Due to the South Bridge resource deployment, the system density will only be detected up to 3+ GB (not full 4GB) when each DIMM is installed with an 1GB memory module
Here is the link, follow it all the way to
http://www.msicomputer.com/product/p_spec.asp?model=k8n_neo4_platinum
Hope this helps.
MK
Hello pejegess,
If your OS is reading the 4Gb, it will be running the 4GB even if the bios is only seeing 3GB. You may just need to update the firmware on your motherboard but I suggest that you just leave it as is since the OS is recognizing the 4GB.
Sincerely,
Agent Xiong