8 ",thus failing to clear the roof and weather stipping. The electric signal gets to the motor but the travel is short. If the glass is manually pushed down after opening the door it moves down, clears and returns up as door shuts. Is this a failing motor unit, loose mechanical attachment, binding(not apparent) or programing problem? I tried the window programing sequence I read on line awhile back with no effect
Cars & Trucks - Porsche - Carrera - 2003 Porsche 911 Carrera
Answers & Comments
Hello there
Do you hear any funny noises when you try to roll the window down or up? If yes you will need to replace the window regulator.Here is part number
996 624 102 06
If the window rools up and down without any noise the regulator might be ok and you will need a micro switch for the door handle ,which controls the upper movement of the window.
part number
996 613 125 00
Of course the best is yo look behind the door panel and see....
i hope this will help you
proporsche
hello art
yes it is posible that the nut which hold the regulator in place could be loose,or the window bracket on tha rail is loose have a look
proporsche
hello Art
any luck with the window?
proporsche