There is a connector under floor mat on front passenger side. With the car turned off, jump this contactor out and turn the car to on position. After 2 seconds the abs light will blink given you codes. After you fix the problem, you will need to remove the jumper, and pull all 3 abs fuses. Wait 3 seconds a reinstall the fuses. Now plug the connector back into its holder. Now start the car, and the code should be cleared.
Answers & Comments
There is a connector under floor mat on front passenger side.
With the car turned off, jump this contactor out and turn the car to on position. After 2 seconds the abs light will blink given you codes.
After you fix the problem, you will need to remove the jumper, and pull all 3 abs fuses. Wait 3 seconds a reinstall the fuses. Now plug the connector back into its holder.
Now start the car, and the code should be cleared.