Which engine? i roll dice 1.0L G10. Suzuki (25-33 psi) depends on engine, and test done. the key pressure and running pressure the fuel pressure regulator does this. and leak down test. the TBI system and MPI work different. the FP reg is quite different ill not guess what is there. until you say, what engine and EFI it runs.
the chart below is a start. its the running pressure i think. when i do EFI, i do all 5+ tests in the book (FSM) fuel pressure , run /non run leak down test. shut tests. and the MPI balance test. but that is how I do it, 100% not just 1 .
line up, of engines. 1.0 L LP2 I3 suz, G10 actual 25-31 PSI
Answers & Comments
Which engine?
i roll dice 1.0L G10. Suzuki
(25-33 psi)
depends on engine, and test done.
the key pressure and running pressure
the fuel pressure regulator does this.
and leak down test.
the TBI system and MPI work different. the FP reg is quite different
ill not guess what is there. until you say, what engine and EFI
it runs.
the chart below is a start.
its the running pressure i think.
when i do EFI, i do all 5+ tests in the book (FSM)
fuel pressure , run /non run
leak down test.
shut tests.
and the MPI balance test.
but that is how I do it, 100% not just 1 .
line up, of engines.
1.0 L LP2 I3 suz, G10 actual 25-31 PSI
1.3 L L72 I4
1.3 L LY8 16-valve I4