A13 tablet launcher not working due to density
Downloaded density changer from play store and changed the density to 100(stock density was 160) it rebooted and when it went to the home screen, it gives an error message that the launcher stopped working. I can go to settings but i can't go to the main screen or the app drawer to change back the density. Already done with factory reset and the density stayed the same and is still getting the same error. Need help. If someone knows how to fix this please email me at : [email protected] or send me a text message at +639176522694(GLOBE). Willing to pay for the service(so long as it is reasonable). -Bought it for 3,700php, so if it would cost me more than that then i'll just buy a different tablet for my baby girl. Thanks!
Tablets & eReaders - Generic - A13-MID 1.2GHz 512MB 4GB 7" Capacitive Touchscreen Tablet...
Answers & Comments
I just did something exactly like this on my phone. Here's what I did for solving it.
NOTE: you will need access to a PC with internet connection and your problem Device must have access to the internet. You also need access to the PLAY store on both the PC and the problem device. From what I understand from reading your explanation this should not be a problem.
1 - Start your Device as normal and when you get the force close message go to the Report option.2 - Once on the report screen (accept the terms and conditions if they appear) you should be able to pull down the notifications bar.3. On the PC go to the play store (you must log in with the same account as the one in your problem device)4. Search for a different Launcher and install it through the play store on your PC. (I used Zeam Launcher for resolving my issue but I did this on a phone so it might not be available for a tablet. You can search for Launcher and find one that way)
5. The new launcher should automatically start downloading and installing on your problem device. You should be able to see this happening on the notification bar.
6. Once finished, just go back to the main screen. You should get the option of what launcher to use. Select the newly installed launcher. (do no use the default option).
7. Once in the new launcher, go to the density changer application and change it back to the original density.
8. Reboot your tablet and it should now work correctly.
NOTE #2: I did this on a phone. I've never owned a tablet so I'm not 100% sure this will work for you.
Hope this helps solve your problem.