TO ADJUST REAR PARKING BRAKE CABLE YOU NEED TO RAISE THE REAR OF THE VECHICLE SUPPORT VECHICLE USING JACK STANDS.MAKE SURE VECHICLE PARKED ON LEVEL SOLID GROUND. BLOCK THE FRONT WHEELS REMOVE REAR WHEEL.MAKE SURE PARKING BRAKE IS RELEASED NOW IF YOU HAVE REAR DISC BRAKES REMOVE THE PARKING BRAKE SHOES AND DISCONNECT THE PARKING BRAKE LEVER. UNBOLT THE CABLE HOUSING FROM THE BACKING PLATE UNBOLT ALL CABLE BRACKETS REMOVE THE EXHAUST SHIELD FOR ACCESS TO THE CABLE CLAMPS TRACE THE CABLE FORWARD LOCATE THE CABLE CLAMP LOOSEN THE CLAMP BOLT AND SLIDE THE CABLE HOUSING OUT OF THE CLAMP. DISCONNECT THE CABLE END FROM THE EQUILIZER BY ALIGNING THE CABLE WITH THE SLOT IN THE TOP OF THE EQULIZER SLIDE THE CABLE END OUT OF THE HOLE.THEN YOU PUT EVERY THING BACK IN PLACE VISA VERSA.