Possible lid switch problem, can be shorted out to prove, open the top complete lid for access. To do this insert a flat blade 4" from each side at the front panel between the front panel and lid to release the clips, lid will now lift and switch is on the underside of the lid RH side, short wires and test spin, replace switch if machine runs, do not leave machine with switch shorted and ensure supply is isolated as necessary.
Answers & Comments
Possible lid switch problem, can be shorted out to prove, open the top complete lid for access. To do this insert a flat blade 4" from each side at the front panel between the front panel and lid to release the clips, lid will now lift and switch is on the underside of the lid RH side, short wires and test spin, replace switch if machine runs, do not leave machine with switch shorted and ensure supply is isolated as necessary.