Remove the top cover,then the front will need to be removed to install the new belt,after that reinstall the belt around the drum and belt tensioner/idler pulley, and then over the motor shaft pulley,align the belt on the drum by slowly rotating drum counterclockwise by hand to make sure its lined up with the old belt mark on the drum,then reinstall the front cover and test run it and if all is o.k. reinstall the top cover,please rate this if helpful,Thank you
Answers & Comments
Remove the top cover,then the front will need to be removed to install the new belt,after that reinstall the belt around the drum and belt tensioner/idler pulley, and then over the motor shaft pulley,align the belt on the drum by slowly rotating drum counterclockwise by hand to make sure its lined up with the old belt mark on the drum,then reinstall the front cover and test run it and if all is o.k. reinstall the top cover,please rate this if helpful,Thank you