There are two ways to enter the service

mode.

Method 1: Turn the machine on while

pressing the "On Line" key and "Escape"

key together until "1. Service Menu1"

appears on the display.

NOTE: If you switch the machine off, any

jobs stored on the hard disk using

the sample print and protected print

features will be deleted.

Check first with the user tools to

see if there are any jobs stored with

these features

(Menu key - Sample Print, or

Protected Print).

Method 2: Press the "Up/Down arrow" keys

together for about 5 seconds, then press

the "Enter" key.
"1. Service Menu1" appears on the display.