After 4 years of being turned off, it started screwing up again
I bought the alarm 4 years ago. After an inordinate amount of time (30 hours) waiting around the installation place and the theft of articles from my car, it seemed like it was working. Then after a week or two the alarm started going off for no reason and I took the battery out of the transmitter and have not used it since. Now it has raised its ugly head again. This morning my battery was dead and that dreaded blue light was blinking. I have charged the battery and the blue light is no longer blinking, but I don't trust it.
Home Security - Viper - Security and Remote Start System (basic install included)
Answers & Comments
If your worried about it not being installed correctly you should take it to a shop in your area and have it professionally removed or properly installed. if it is a remote start system i wouldn't tackle it yourself. most alarm systems tie into the starter and or ignition circuits. if you want a quick fix look under neath the dash for a small black box with a bunch of colorful wires going to it. there will be a few plugs, one with 10 or more 20 gauge wires. this should be the power input along with light flash door trigger hood trigger etc etc. try unplugging it, the led light should stop and it should give you no more trouble. after doing this make sure you check that the vehicle still starts. if you have any other questions or are located in the Phoenix, Arizona area i would be more then happy to help.