After performing the self-clean on my Thermador Pro Harmony oven, the oven no longer heats up. The light and fan come on, but it won't heat up. I've read others have had the same problem and the high limit switch needs to be reset. Where on my oven I can find this switch? It sounds like it's an easy fix...if I can find the switch. Thank you
The following website has the diagrams of your unit. http://www.appliancepartspros.com/partsearch/model.aspx?model_id=233139&diagram_id=194244#d194244
Part #23 lists a Thermal Repair Kit, and might fix you up, but the website lists the part as unavailable. However, part #26 is the thermal sensor. I've seen hi-limit switches, but couldn't run on down in the oven diagram. It might be on another diagram, if you look around. The thermal sensor could be the bad component, and on on the right rear of the unit, looking from the front, guaging from the diagram. Hope this helps.
Can you please give me the model number? I will be able to assist a lot better with the actual model number. Thanks!Can you please give me the model number? I will be able to assist a lot better with the actual model number. Thanks!
Answers & Comments
The following website has the diagrams of your unit.
http://www.appliancepartspros.com/partsearch/model.aspx?model_id=233139&diagram_id=194244#d194244
Part #23 lists a Thermal Repair Kit, and might fix you up, but the website lists the part as unavailable. However, part #26 is the thermal sensor.
I've seen hi-limit switches, but couldn't run on down in the oven diagram. It might be on another diagram, if you look around.
The thermal sensor could be the bad component, and on on the right rear of the unit, looking from the front, guaging from the diagram.
Hope this helps.
Here is a breakdown on all of the parts to your oven. Click here!
Can you please give me the model number? I will be able to assist a lot better with the actual model number. Thanks!
Try this link. Click here!