AFTER... bummer! One of your mating surfaces was less than perfect and should have bee resurfaced... Now they all should be removed & resurfaced. AND Until you do so... that vibration will only get worse and put stress on every mating surface, seal and bearing
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
AFTER... bummer!
One of your mating surfaces was less than perfect and should have bee resurfaced...
Now they all should be removed & resurfaced.
AND
Until you do so... that vibration will only get worse and put stress on every mating surface, seal and bearing