Ak77-600 max won't post
My machine was working fine for the longest time, and suddenly it crashed and when I went to reboot, it won't even post.
I've troubleshooted for hours, resetting the cmos jumper, trying different configs of memory, different videocards, different processor, different hard drives, no post beep at all - when there's 3 sticks of mem in, it will spin up the hard drives like everything is fine, but still no post beep/start up, when there's 0-2 sticks in, it refuses to even start up the drives..
anyone hear of anything like this? any solutions?
I've troubleshooted for hours, resetting the cmos jumper, trying different configs of memory, different videocards, different processor, different hard drives, no post beep at all - when there's 3 sticks of mem in, it will spin up the hard drives like everything is fine, but still no post beep/start up, when there's 0-2 sticks in, it refuses to even start up the drives..
anyone hear of anything like this? any solutions?
Computers & Internet - AOpen - AK77-600 Max Motherboard
Answers & Comments
Bios is gone man and needs to be replaced. You should hear error codes that is what its all about. if not your going to need a new bios or flash the old one if it has not been already.
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620
Bios is gone man and needs to be replaced. You should hear error codes that is what its all about. if not your going to need a new bios or flash the old one if it has not been already.