Hi, that normally happens when the scooter is in freewheel mode, now double check the lever located at the rear, okay having done that , disconnect the axle from the main frame, check the connection here are clean and touching , if it's a plug remove the plug stray in some contact cleaner , refit making your it 's a tight fit,
Still got the problem then check the micro switch located near the freewheel lever , normally located on the brake mech , make sure it connecting when the freewheel lever is moved.
Answers & Comments
Hi, that normally happens when the scooter is in freewheel mode, now double check the lever located at the rear, okay having done that , disconnect the axle from the main frame, check the connection here are clean and touching , if it's a plug remove the plug stray in some contact cleaner , refit making your it 's a tight fit,
Still got the problem then check the micro switch located near the freewheel lever , normally located on the brake mech , make sure it connecting when the freewheel lever is moved.
~Regards
GeWiz.