Almost zero water pressure or hot water from our hand-held Moen shower head model # 3827 CP. Our regular head next to it works fine. Suggestions as to what the problem or solution might be?
Plumbing - Moen
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Remove the head from the hose and test. If water flow is adequate through the hose, the problem is in the head. Look inside the head where the hose connects for a restriction, perhaps twisted rubber. If the issue might be with clogged jets, try soaking in CLR to remove built up deposits.
Hope this helps, --W/D--