Amp or something cutting out
I have a rockford fosgate 401s punch 1200 watt amp. It was working well for about 2 days, but now it cutts out only sometimes and then kicks in again. When it works it pounds so I dont think I blew the amp. And like I said the amp only cuts out once in awhile and only for like a second or two. Am I wiring the subs wrong? I have 2 svc 4 ohm subs and i have the positive and negative wires of the subs going into the 2 channels on the amp, so im not wiring parallel or in a series. Is that wrong?
Car Audio & Video - Rockford Fosgate - Punch 401S Car Audio Amplifier
Answers & Comments
Power caps store power from the battery and they feed constant power to the amp so you dont get no drainage! this could be one reason..
have you bridged both subs and wat gauge wire are you using.
these amps can only handle one bridged sub at 4ohms and this amp is recommended that u use 8gauge or higher. if your running to subs i normally reccomend using 4 gauge power wire as you get more rms power feed to the amp
you can get a power cap or anyother accersory cheap online at my suppliers.. caraudiosecurity << click to enter >> hope this helps and please rate me :)
You