AVIC-F700BT won't work after dealer did some work on it
I had some work done on my car, and now the stereo won't work. There is power to the unit, because you get the blue startup screen, but then it all goes black and the home screen never comes up. The bluetooth will connect, and when you press the menu or map button, you can hear the noise, but nothing happens. Please help.
GPS - Pioneer - AVIC-F700BT Car GPS Receiver
Answers & Comments
Have you tried updating the firmware? A new version is available from the Pioneer website. You will need a blank, formatted SD card. Unzip the files from the Pioneer download and copy to the SD card. With the key out of the ignition put the SD card into the unit. Put the key in the ignition and turn to position I to turn on the F700BT. The update takes around 10-15 minutes. Ensure that no unnecessary electrical accessories are on in order to save battery life.
If that fails you may wish to check out www.avic411.com.