Azimuth motor stalling missing the electronic home sensor
Lx200GPS 14inch Meade telescope:
During the alignment procedures, the telescope do not stop and return from the south home position. Motor stalling is displayed in the Hand Box Control.
During the alignment procedures, the telescope do not stop and return from the south home position. Motor stalling is displayed in the Hand Box Control.
Optics - Meade - LX200GPS Telescope
Answers & Comments
Check for binding in the gears; my 10" had aluminium chips in the fork base that jammed the gear. Cured by removing the RA manual adjust assembly - was useless anyway, as it could only be used with the RA unlocked. One setscrew in the fork base holds it in place,just loosen and pull up.