BenQ FP71E doesn´t gives video
Hi!
The problem with the LCD monitor primarly is the lack of video when the PC boots, but If give some firm knocks on the side , sometimes it gives video..it´s connected to the DVI connector.
Thanks in advance
The problem with the LCD monitor primarly is the lack of video when the PC boots, but If give some firm knocks on the side , sometimes it gives video..it´s connected to the DVI connector.
Thanks in advance
Computers & Internet - BenQ - FP - FP71G 17" LCD Monitor
Answers & Comments
This suggests there is a dry joint on on the printed circuit board. I would go over with a soldering iron on all joints that look suspect.