Bernina Bernette 600 Deco embroidery machine
I recently purchased a used Bernina Bernette 600 Deco embroidery machine. I stitches the first few stitches fine and then doesn't seem to catch the bobbin thread. I have rethreaded the machine and bobbin and replaced the needle. The error message states bent needle or thread entangled. Any suggestion
Sewing Machines - Bernina - Bernette Deco 600
Answers & Comments
It could be that there is a loose piece of thread, or some fluff which is obstructing the tension gauge. Try blowing around the theading area (or even run the hoover pipe near it to see if you can **** it out). I cleared mine by folding a piece of non fluffy material and rubbing gently between the tension dial and machine.
Good luck