Dear Noorul, Your question seems to be related to a copier. It is categorized under tv & video. I hope this is the information you are looking for:
Code C-0104
Description Abnormality of the vertical conveyance motor (M8) power in the printer control board (PRCB). An error detection signal (blowout of ICP) of M8 is detected when M8 is turned ON.
Causes • Vertical conveyance motor (M8) • Printer control board (PRCB) Konica Minolta bizhub Pro 951 Error Codes
Sounds like you have some replacement of parts that are needed. Let me know if you need a service manual. I will look for that.
Answers & Comments
Dear Noorul,
Your question seems to be related to a copier. It is categorized under tv & video. I hope this is the information you are looking for:
Code
C-0104
Description
Abnormality of the vertical conveyance motor (M8) power in the printer control board (PRCB). An error detection signal (blowout of ICP) of M8 is detected when M8 is turned ON.
Causes
• Vertical conveyance motor (M8) • Printer control board (PRCB)
Konica Minolta bizhub Pro 951 Error Codes
Sounds like you have some replacement of parts that are needed. Let me know if you need a service manual. I will look for that.
Blessings!
Thanks a lot for your help.
:-)