Keep checking that the fluid level in the master cylinder is topped off. Break loose the bleeder at the farthest away wheel (right rear) just so you know you can open it. 1) Have someone pump the pedal to obtain pressure. 2) Open the bleeder a bit and allow fluid to run into container (use hose if available). 3) close bleeder and repeat until no bubbles in fluid. Left rear is next, then front right, then front left. Your assistant should not release pedal until you close the bleeder!!
Answers & Comments
Keep checking that the fluid level in the master cylinder is topped off.
Break loose the bleeder at the farthest away wheel (right rear) just so you know you can open it.
1) Have someone pump the pedal to obtain pressure.
2) Open the bleeder a bit and allow fluid to run into container (use hose if available).
3) close bleeder and repeat until no bubbles in fluid.
Left rear is next, then front right, then front left.
Your assistant should not release pedal until you close the bleeder!!