Hold down the Multifunction Button ( Please refer diagram shown below ) for 2-3 seconds until you hear 2 rising tones.The yellow light will flash every 4 seconds.After the headset is turned on, it will attempt to connect to the last device that it was paired or connected with if that device is available ie.powered on and within range.Otherwise the headset will remain in the 'on' state.Your valuable feedback would be appreciated.
Answers & Comments
Hold down the Multifunction Button ( Please refer diagram shown below ) for 2-3 seconds until you hear 2 rising tones.The yellow light will flash every 4 seconds.After the headset is turned on, it will attempt to connect to the last device that it was paired or connected with if that device is available
ie.powered on and within range.Otherwise the headset will remain in the 'on' state.Your valuable feedback would be appreciated.