Check microswitch in bonnet catch using a multimeter in continuity setting. To do this you will need to disconnect the microswitch connector and remove.
Watch the video: https://www.youtube.com/watch?v=RpFbQQQnvO4
If you short the connector with a piece of wire and check the dash. This will simulate a switch closure. If it still shows bonnet open, then the wiring from the bonnet sensor switch is damaged and will need to be fixed.
Answers & Comments
Check microswitch in bonnet catch using a multimeter in continuity setting. To do this you will need to disconnect the microswitch connector and remove.
Watch the video:
https://www.youtube.com/watch?v=RpFbQQQnvO4
If you short the connector with a piece of wire and check the dash. This will simulate a switch closure. If it still shows bonnet open, then the wiring from the bonnet sensor switch is damaged and will need to be fixed.