This dryer is about 8 years old. The Start Light has started blinking and will not start. I removed the drum, and cleaned out the filter and air chamber. I checked the thermal cutoff on the heater. That is fine. My question is am I supposed to have a reading of some kind on the thermistor near the heater? I also did not get a reading on the door switch, so I jumped it out at the control, and still have blinker, no start. I'm lost as to what to check now, unless the control is bad. Any one have any ideas on something I missed to determine where this problem lies..? Thanks Bob H

Dryers - Bosch - Nexxt WTMC 3300 Electric Dryer