It's probably burned out. Inspect it close for a burnt melted looking spot. If none found, disconnect wires on the element at the back inside of the oven and check the two wires for continuity with an ohm meter. It's bad if there is not continuity.
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
It's probably burned out. Inspect it close for a burnt melted looking spot. If none found, disconnect wires on the element at the back inside of the oven and check the two wires for continuity with an ohm meter. It's bad if there is not continuity.