They overlooked a few small details on these when they went into production. Clean any debris out and drill a few 1/4 inch holes around the perimeter of the lower casing. Be very careful not to hit the coils. If you evin nick them you will puncture them and loose the charge. Hope this helps. Good luck.
Answers & Comments
They overlooked a few small details on these when they went into production. Clean any debris out and drill a few 1/4 inch holes around the perimeter of the lower casing. Be very careful not to hit the coils. If you evin nick them you will puncture them and loose the charge. Hope this helps. Good luck.