Bought this car, dont know how to use the remote start
I bought a car with an astrostart tx 1000 (thats what it says on the back of the key fob) but i dont know how to make it work, or if it does work. is there a code?
Vehicle Parts & Accessories - Astra
Answers & Comments
To add a transmitter on an AstrostartTM Remote Car Starter, follow the
following steps:
• Open the hood
• Turn the key to the ON position
• Push and release the brake pedal
• Cycle the ignition OFF - ON – OFF – ON – OFF. Warning! At the end, the key
should end at OFF. If sequence is made successfully, the parking light will
blink 4 times.
• Push any button on the transmitter to enter in learning mode and the parking
lights will flash 1 time. Repeat the same sequence for any additional
transmitter that needs to be learned in the system.
• Push the brake pedal once
End of programming