Bread pan pops out during the kneading 2 cycle
This is my first use on this machine (Breadman Ultimate Plus). When it reached the 2nd knead cycle we heard a pop and looked in the window - the machine kept going but the dough wasn't moving. I tried the pause button but nothing happed. So, I opened the door and replaced the pan -- it popped back out a few minutes later and I repeated my steps making sure it was securely placed. I've had other bread machines and know how to securely seat the pan - it was in place when I started. same problem here...
Kitchen Appliances - Others - Breadman - TR2200C Ultimate Bread Maker
Answers & Comments
I had a similar problem after using the same machine for several years. It worked well for years and then popped off the shaft whenever I had a rather stilll dough. To solve the problem I bent the clips on each side of the bread pan that hold the pan into the machine up and toward the center of the machine. I did not use any tools to do the bending. It solved the problem. The pan no longer jumps up out of the clips and off of the shaft.