Brought a new monda vege spray sink mixer for kitchen.Not sure how to connect the mixer hoses together.No picture instruction were provided which makes it hard to install
It does, hot connection goes one side and cold connection goes on other. If you get it wrong then just swap em. It intalls better then you one you took off. I believe it just requires 1 nut to go on bult.I replaced mine in 3 minutes.
The monda vege mixer is a little more complex than the standard mix-tap, at the base of the mixer you have 3 inlet holes, H, C & an unmarked one in the centre, H for Hot, C for Cold, unnamed for the long tube thinggy, the copper two-piece thing goes on the end of the long metal tube thinggy, with the head unit hose attached to the bottom of that ... that seems to be the most complex part of it ... although, i've got mine installed and semi-working (i have no hot, but hot water comes out when in the cold on position) ...The monda vege mixer is a little more complex than the standard mix-tap, at the base of the mixer you have 3 inlet holes, H, C & an unmarked one in the centre, H for Hot, C for Cold, unnamed for the long tube thinggy, the copper two-piece thing goes on the end of the long metal tube thinggy, with the head unit hose attached to the bottom of that ... that seems to be the most complex part of it ... although, i've got mine installed and semi-working (i have no hot, but hot water comes out when in the cold on position) ...
Answers & Comments
It does, hot connection goes one side and cold connection goes on other. If you get it wrong then just swap em. It intalls better then you one you took off. I believe it just requires 1 nut to go on bult.I replaced mine in 3 minutes.
The monda vege mixer is a little more complex than the standard mix-tap, at the base of the mixer you have 3 inlet holes, H, C & an unmarked one in the centre, H for Hot, C for Cold, unnamed for the long tube thinggy, the copper two-piece thing goes on the end of the long metal tube thinggy, with the head unit hose attached to the bottom of that ... that seems to be the most complex part of it ... although, i've got mine installed and semi-working (i have no hot, but hot water comes out when in the cold on position) ...