Sir/Mam, there is a small Intergraded Circuit Chip That is removal on the Copier control Board that has failed. The Card is located on the back of the copier this chip my also not be plugged in properly. I've never send that code before.. That chip carries the serial number and counter info (Digitally) When ever that board is swapped out you have put that chip on the new board. If not the chip then might be the board itself.
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
Answers & Comments
Sir/Mam, there is a small Intergraded Circuit Chip That is removal on the Copier control Board that has failed. The Card is located on the back of the copier this chip my also not be plugged in properly. I've never send that code before.. That chip carries the serial number and counter info (Digitally) When ever that board is swapped out you have put that chip on the new board. If not the chip then might be the board itself.
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f