1) This C-5005 error is detected at the time of receiving the drive communication. The main reason for this problem is the printer's control board.

2) Verify that the fuser lamp switches ON when the main power is switched ON.

3) Check if the installation, and the operation of the TH1. Make sure the continuity of H1 and H2 is correct, if not replace it whenever necessary.

Code C-5005
Description An error is detected while in receiving the drive communication. An reception error interrupt occurs when in receiving a serial data from the drive board. Or, a request for sending the data again is made 3 times due to a checksum error/ID information error and another error is detected again.
Causes Printer control board (PRCB) Drive board