C NOT COOLING
The condenser suction line did not give any reading on the gauge and the liquid line gave 65 psi after few minutes the liquid line rose to the maximum. I inspected the line and there are no bends on the line .
Heating & Cooling - Intertherm - P3RA-048K Air Conditioner
Answers & Comments
Sounds to me like your orfice in the A coil is plugged
I am thinking more along the lines that you have a restriction somewhere in the condenser sheet coil, or the condenser line coming from the compressor. If you have no suction pressure this would explain a restriction.
I would check filters if you have them installed.
On a side note the pressure of refrigerants change due to the increase and decrease in temperature. So depending on the temperature would determine the pressure of the refrigirant.