Calibration Error on Agfa Arucs II Scanner
I keep getting a calibration error on my Agfa Arcus II scanner. We have replaced the bulb on the transparency option and it worked a couple of times, but it is giving me the message again. Do you have any solution? The calibration error on the bottom of the warning was 82200000:5
Office Equipment & Supplies - Agfa - Arcus II Flatbed Scanner
Answers & Comments
Try disconnecting the transparency module and using the reflective unit only. If that works, the transparency module's connection may be dirty and interfere the calibration process.
If the problem occurred even without the Transparency Module, check those wire connections to the logic board inside the scanner (the ones that can be disconnected without removing the logic board's metal cover). Some of them may become loose. Try this before changing the lamp tube because it's easier, costs nothing and most likely is the culprit.
P 4