Try to hold both and press the M/L P/L button then turn on, u r entering the test mode of the mcahines,, then press 97 and start button.
This is a clamp error try fliping the clamp plate over and hit the reset. If that dosen't work make sure the magnet is in place on the rear arm of the clamp. let me know if this dosen't work or if symptoms change.
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Try to hold both and press the M/L P/L button then turn on, u r entering the test mode of the mcahines,, then press 97 and start button.
This is a clamp error try fliping the clamp plate over and hit the reset. If that dosen't work make sure the magnet is in place on the rear arm of the clamp.
let me know if this dosen't work or if symptoms change.