If you have original charger: 1. Power-Off phone 2. Connect charger to phone 3. Connect charger to 220/110V 4. Charge phone during 30-40 minutes 5. Power-On phone and use it
If you don't have original charger: 1. Remove batetry from phone 2. Use external power supply and charge battery 3. Power-On phone and use it
Answers & Comments
Sir,
If you have original charger:
1. Power-Off phone
2. Connect charger to phone
3. Connect charger to 220/110V
4. Charge phone during 30-40 minutes
5. Power-On phone and use it
If you don't have original charger:
1. Remove batetry from phone
2. Use external power supply and charge battery
3. Power-On phone and use it
Thanks
Good Luck
In that type of case,*### is used then goto sensor type & change the type of sensor
Camera module not ready